課程清單
-
此課程對 LinkZero™-AX 產品系列提供詳盡的介紹。詳細說明裝置的關機和喚醒功能，以及適用於各種應用的數個實作理念。討論主要波形和適當的測試程序。同時還提供數個秘訣，以避免在 LinkZero-AX 設計中出現問題。請學習本課程，以便深入瞭解消費性家電製品如何實現零待機功耗。
開始本課程前，請先閱讀「安全聲明事項」。 -
This course provides a thorough introduction to the LinkZero™-AX product family. Device shutdown and wake-up functionality are covered in detail, along with several implementation ideas for various applications. Key waveforms and proper testing procedures are discussed. This course also provides several tips to help avoid problems in your LinkZero-AX design. Take this course to learn more about achieving 0-watt standby in consumer appliances.
Please read our Safety Statement before starting this course. -
本課程說明第一次正確啟動返馳式電源供應器的完整程序。此測試程序會協助您在不損壞元件 (或傷害自己) 的情況下，安全地啟動電源供應器，並且會協助您徹底評估新設計的基本功能。通常被忽視的幾個效能測試會揭示隱藏在設計中的瑕疵，這些瑕疵可能會在日後的測試中導致某些問題。請學習本課程，以瞭解啟動和測試電源供應器的正確方式
附加檔案 大小 課程要點 - 第一次啟動返馳式電源供應器 1.1 MB -
This course describes the complete procedure for properly bringing up your flyback supply for the first time. This test procedure will help you safely start-up your power supply without damaging components (or yourself), and will help you thoroughly evaluate your new design for basic functionality. Several often-overlooked performance tests will reveal hidden defects in your design that can lead to problems during later testing. Take this course to learn the correct way to bring up and test your power supply.
Please read our Safety Statement before starting this course.
附加檔案 大小 Course Notes: Bringing Up a Flyback Supply for the First Time 1.03 MB -
This course describes the steps necessary for troubleshooting and repairing a power supply that is producing unacceptable levels of audible noise. Possible causes are discussed and solutions are recommended. Take this course if your power supply is producing loud audible noise when tested in the final enclosure.
Please read our Safety Statement before starting this course.
附加檔案 大小 Course Notes - Fixing a Flyback Supply that has Audible Noise 659.64 KB -
本課程針對產生可聞雜訊過大的電源供應器，說明了對其進行疑難排解與修復所需的步驟。課程中討論了可能的原因，並提供了建議的解決方案。在最終的外殼中進行測試時，如果您的電源供應器產生的可聞雜訊很大，請學習本課程。
附加檔案 大小 課程要點 - 修正有可聞雜訊的返馳式電源供應器 274.36 KB -
This course describes the steps required for troubleshooting and repairing a power supply that is overheating during operation. The possible causes for overheating in standard power supply components are discussed, and recommended solutions are provided. Take this course if you suspect any components in your design are running too hot.
Please read our Safety Statement before starting this course.
附加檔案 大小 Course Notes - Fixing a Flyback Supply that has Overheating Components 1.47 MB -
本課程針對操作期間電源供應器過熱這一問題，說明了進行疑難排解與修復所需的步驟。課程中討論了標準電源供應器元件過熱的可能原因，並提供了建議的解決方案。如果您懷疑設計中有元件溫度過高，請學習本課程。
附加檔案 大小 課程要點 - 修正元件過熱的返馳式電源供應器 1.89 MB -
本課程提供詳細的電源供應器測試程序，以瞭解其是否符合全球各種能效標準。包括詳列檢查是否符合標準的必要設備、說明如何設定設備、描述如何使用 PI 的能效標準符合性計算器來找出電源供應器的具體目標，以及提供秘訣，協助您避免產生不精準的測量結果。請使用本課程，按照程序進行設計送交官方單位測試前的自行檢查。
附加檔案 大小 課程要點 - 測試是否符合節能標準 1.04 MB -
This course provides a detailed procedure for testing your power supply compliance to various worldwide energy efficiency standards. It defines all of the equipment needed to check compliance, explains how to configure that equipment, describes how to use PI’s Efficiency Compliance Calculator to find the specific targets for your supply, and provides tips to help you avoid inaccurate measurements. Take this course and follow the procedure as a self-check before sending your design out for official testing.
Please read our Safety Statement before starting this course.
附加檔案 大小 Course Notes - Testing Compliance to Energy Efficiency Standards 1002.08 KB