Popular Discussion
- 6 comments
- 1 comment
LED Driver ICs
Details
Power Integrations offers a broad range of highly integrated high power constant current LED driver ICs for use in LED applications where offline power supplies are requried at universal input line cord voltages from 85 to 265 VAC. Topologies include: boost, buck, buck-boost, and flyback.
Our LED Driver ICs offer:
- Phase-controlled TRIAC dimmability
- Single-stage power factor correction (PFC) and accurate constant current (CC) output
- High efficiency
- Compact size
- Low component count
- Long life
- Low maintenance
- Resistance to shock and vibration
- Generation of pure colored light
- Highly integrated
- Design-in made easy with PI Expert design tools
For more detailed information about Power Integrations' LED Driver ICs, please refer to our LED Driver Products Product Selector Guide.
Design Examples
TRIAC Dimmable, High Power Factor LED Drivers
| Document Description | Design Ideas |
Design Example Reports |
Reference Design Reports |
Reference Design Kits |
|---|---|---|---|---|
| Reference Design Report for a High Efficiency (≥85%), High Power Factor (>0.9) TRIAC Dimmable 14 W LED Driver |
 |
RDK-194 | ||
| High Efficiency (≥81%), High Power Factor (>0.9) TRIAC Dimmable 7 W LED Driver |
|
RDK-193 | ||
| 12 W Power Factor Corrected Buck LED Driver |
|
High Power Factor LED Drivers
| Document Description | Design Ideas |
Design Example Reports |
Reference Design Reports |
Reference Design Kits |
|---|---|---|---|---|
| 18 W Passive PFC LED Lighting Supply |
|
|||
| 20 W Single Output, Power Factor Corrected LED Driver |
|
|||
| 20 W Single Output, Power Factor Corrected LED Driver |
|
|||
| 75 W Single Output, Power-factor Corrected LED Driver |
|
|||
| 150 W Power Factor Corrected LLC Power Supply Using HiperPLC |
|
LED Street Lighting
| Document Description | Design Ideas |
Design Example Reports |
Reference Design Reports |
Reference Design Kits |
|---|---|---|---|---|
| 150 W Power Factor Corrected LLC Power Supply For LED Street Lighting |
|
Integrated Non-Isolated LED Driver
| Document Description | Design Ideas |
Design Example Reports |
Reference Design Reports |
Reference Design Kits |
|---|---|---|---|---|
| Universal, 0.5 W, Buck-Boost LED Driver | |
|
||
| Non-isolated, 1.25 W LED Driver | |
|||
| Halogen Light Bulb Retrofit (3 W, 300 mA Output) | |
|
RDK-131 | |
| 4.2 W (12 V, 350 mA) Universal Input, CV/CC LED Driver - Tapped-inductor Non-isolated Buck Configuration |
|
|
||
| Low Cost Dimmable LED Driver Using a Valley Fill Current Shaping Circuit (9 W, 70 V) |
|
|||
| High Efficiency (>90%), High Voltage Constant Current LED Driver | |
|||
| 11 W High Efficiency, Constant Current, LED Driver Using Boost Topology |
|
|||
| 12 W Power Factor Corrected Buck LED Driver |
|
|||
| Compact LED Driver for Integrated Lamps (14 W, 700 mA) | |
|
Integrated Isolated LED Driver
| Document Description | Design Ideas |
Design Example Reports |
Reference Design Reports |
Reference Design Kits |
|---|---|---|---|---|
| 3.67 W (10.5 V, 350 mA) Universal Input, CV/CC LED Driver - Flyback
Configuration |
|
|||
| 4.2 W (12 V, 350 mA) Universal Input, CV/CC LED Driver - Flyback Configuration | |
|
||
| 5.32 W (7.6 V, 700 mA) Universal Input, CV/CC LED Driver | |
|
||
| High Efficiency (≥81%), High Power Factor (>0.9) TRIAC Dimmable 7 W LED Driver |
|
RDK-193 | ||
| 8.4 W (12 V, 700 mA) Universal Input CV/CC LED Driver |
|
|||
| Reference Design Report for a High Efficiency (≥85%), High Power Factor (>0.9) TRIAC Dimmable 14 W LED Driver |
|
RDK-194 | ||
| Universal, 24 W LED Driver | |
External LED Driver
| Document Description | Design Ideas |
Design Example Reports |
Reference Design Reports |
Reference Design Kits |
|---|---|---|---|---|
| 18 W Passive PFC LED Lighting Supply | |
|||
| 20 W Single Stage Flyback Power Supply With PFC for LED Ballasts | |
|||
| Universal 12 V 1.67 A PF>0.9 Phase Dimming | |
|||
| Single Stage PFC, Constant Current LED Driver (75 W, PF >0.9) | |
|
Recommended Product Families
| IC Product Family |
Design Guides | Typical Circuit Configuration |
Power/Current Ratings |
Description |
|---|---|---|---|---|
| HiperPLC™ | |
PFC+LLC Half-bridge |
NA | HiperPLC™ is a combined PFC and LLC off-line controller with an integrated hi-side/lo-side high voltage half bridge driver. The PFC section of the HiperPLC supports a universal input, continuous-current mode (CCM) topology that does not require a sinusoidal input reference. |
| LinkSwitch™-II | |
Flyback | Up to 5.5 W | Tight CV/CC, primary side control, capable of exceeding all energy efficiency specifications. |
| LinkSwitch™-PL | NA | Flyback | 1.5 W to 16 W | Single Stage PFC with CC Output, TRIAC-dimmable LED Driver IC for Non-Isolated Applications |
| LinkSwitch™-PH | NA | Flyback | Up to 50 W | Single-stage PFC with Primary-Side CC, TRIAC-dimmable LED Driver IC |
| LinkSwitch™-TN | |
Buck | Up to 360 mA | Energy-efficient capacitive drop replacement with minimal external component required |
| TinySwitch™-III | NA | Flyback | Up to 28.5 W | Improved design flexibility. Reduced input capacitance and transformer size due to on-time extension and I2f ratings. |
| TOPSwitch™-GX | |
Flyback | Up to 210 W | Extended power range with UV detection, OV shutdown, externally programmable current limit and remote ON/OFF capability. |
| TOPSwitch™-HX | |
Flyback | Up to 254 W | TOPSwitch-HX incorporates a 700 V power MOSFET, high voltage switched current source, PWM control, oscillator, thermal shutdown circuit, fault protection and other control circuitry onto a monolithic device. |
| TOPSwitch™-JX |
|
Flyback | 12 W to 177 W | Integrated Off-Line Switcher with EcoSmart™ Technology for Highly Efficient Power Supplies |
Related Design Support Documents
| General Design Information |
|---|
| Product Datasheets |
| LED Selector Guide |
| Solid-State Lighting Solutions – AC-DC LED Driver ICs |
Related Links
Magazines and Journals
Market Researchers
Forums
Power Integrations Support
- Power Integrations Green Room: Agencies
- PI Expert™, our interactive design program, takes a user's power supply specifications and automatically determines the critical components (including transformer specifications) needed to generate a working switched mode power supply. It reduces design time from days to minutes.
- Designers can also use our "Ask an Engineer" feature or consult our reference library, containing more than 200 online reference designs, applications notes, engineering prototype reports, design ideas, and other documents.
Contact your local Power Integrations Sales Representative or Distributor for assistance.